After successes with our Runner and Trinity models we developed a new 3D aerobatic special with range of 1000mm = INFINITY!
| Wingspan | 1010 mm |
| Length | 1070 mm |
| Weight | 450-550 g (dep.on the RC equipments) |
| Servos | 4 |
| Material | EPP |
| Functions | Rudder, Elevator, Ailerons, Motor |
| Level | ARF |
Model description:
Full 3D acrobatic special that will satisfy even the most demanding pilots!
The model is comprehensively reinforced with carbon and for this reason can handle even really extreme acrobatic figures. If you fit the model with 4S LiPol, you will be amazed !! Infinity chassis is masive and demountable also. The aircraft is very stable even at low flight speeds, holds as nailed in all aerobatic figures and the overall impression is balanced for the pilots who piloted the model.
We would recommend Infiniti to all pilots who have at least basic experience in controlling of RC model with ailerons.
We recommend using an engine with a thrust of over 500g (approx. 190W, 900-1150rpm / V) which also ensures sufficient re-motorization of the model for dynamic expression or ascending flight. Always choose the propellers according to the recommendations of the engine manufacturer. The double-sided attractive print of the wing, fuselage and all rudders makes model very attractive!
| Brushless motor | 170-220W, 900-1200ot/V |
| Propeller (by the engine) | 10×4.7″SF, 10×5″, 11×4.7″SF |
| ESC | 25-35A (min.3A BEC) |
| Servos | 4x microservos (thrust +-2,5kg) |
| Battery | Lipol 3-4S, 900 – 1500mAh |
| Adhesives | CA + activator, LA |
PDF Manuál
Stavební návod ke stažení