GLIDY is our smallest model and responds to the need to take the model with you wherever possible, without complicated handling and, as we say, Let’s go have fun. We offer the model in two variants GLIDY (All functions are controlled) and this GLIDY Classic (rudder, elevator and engine are controlled), so GLIDY is intended for all pilots! In addition, a flight weight of up to 150g is a prerequisite for a lot of frolicking on any flight surface.
| Wingspan | 895 mm |
| Lenght | 670 mm |
| Weight | 130-150 g (dep. on the RC equipments) |
| Servos | 4 |
| Wing area | 13.4dm2 |
| Functions | Rudder, Elevator, Ailerons, Motor |
| Level | ARF |
How knows our free flying model MINIOWL 810, knows well that this model is capable of sailing in an incredible way. This model, GLIDY Classic, is based on the concept of the MiniOwl 810, which is practically a response to your requests to make a radio-controlled model of a glider in similar dimensions. So here it is.
The model has a full fuselage, so it is very strong and durable, it means, that some fall is not a problem, just lift the plane off the ground and continue flying. Rudder, elevator and engine are controlled. Thanks to the wingspan and the wing profile is the airplane very self-stabilizing, so anyone can really fly it. The full fuselage made of EPP ensures good strength and durability, the model usually does not notice any fall, you simply pick up GLIDY and continue flying. In addition, a flight weight of up to 150g is a prerequisite for a lot of frolicking on any flight surface.
The flight weight is approximately 140g, so the model only needs to be equipped with a +- 30-40W motor, twice 2-4g microservos, 10A ESC and +- 350mAh 7.4V Lipol battery. The construction is really simple, the model can be put into flight form, with a little skill, within 40-60 minutes. There is no need to research and think about anything, the cases for the servos, the mounting elements are ready from the factory, all the jewelry and control elements are included in the kit.
The aircraft is equipped with a minimalist, tasteful graphic design, reminiscent of a classic building with partially exposed beams. The upper and lower sides are very well differentiated for orientation when flying even at higher altitudes.
| Brushless motor | 30-40W, 2000-2900ot/V |
| Propeller (by the engine) | Folding Propeller (4-6″) |
| ESC (speed controller) | 8-12A |
| Servos | 2x microservos (2-4g, +-0,8kg stroke) |
| Battery | Lipol 2-3S, 300 – 400mAh |
| Adhesives | CA + activator, LA |
ALL GLIDY VARIANTS
